WeeWX: Installation on SuSE-based systems

This is a guide to installing WeeWX from an RPM package on systems such as SuSE or OpenSUSE.

Configure zypper

Tell zypper where to find the WeeWX releases. This only has to be done once - the first time you install WeeWX.

sudo rpm --import https://weewx.com/keys.html

curl -s https://weewx.com/suse/weewx-suse15.repo | sudo tee /etc/zypp/repos.d/weewx.repo

curl -s https://weewx.com/suse/weewx-suse12.repo | sudo tee /etc/zypp/repos.d/weewx.repo

Install WeeWX

Install WeeWX using zypper. When you are done, WeeWX will be running the Simulator in the background as a daemon.

sudo zypper install weewx

Status

Look in the system log for messages from WeeWX.

sudo tail -f /var/log/messages

Verify

After 5 minutes, open the station web page in a web browser. You should see generic station information and data. If your hardware supports hardware archiving, then how long you wait will depend on the archive interval set in your hardware.

file:///var/www/html/weewx/index.html

Configure

The default installation uses Simulator as the station_type. To use real hardware, stop WeeWX, change to the actual station type and station parameters, delete the simulation data, then restart WeeWX:

sudo systemctl stop weewx
sudo wee_config --reconfigure
sudo rm /var/lib/weewx/weewx.sdb
sudo systemctl start weewx

Start/Stop

To start/stop WeeWX:

sudo systemctl start weewx
sudo systemctl stop weewx

Customize

To enable uploads such as Weather Underground or to customize reports, modify the configuration file /etc/weewx/weewx.conf. See the User Guide and Customization Guide for details.

WeeWX must be restarted for configuration file changes to take effect.

Uninstall

To uninstall WeeWX, removing configuration files but retaining data:

sudo zypper remove weewx

To remove data:

sudo rm -r /var/lib/weewx
sudo rm -r /var/www/html/weewx

Layout

The installation will result in the following layout:

© Copyright Tom Keffer